A recording has no sound or only one side
What to check when a recording is silent, very quiet, or is missing the other people on a call.
Updated 13 November 2026
Metis AI can only transcribe what reaches it. When a recording is silent or the other side of a call is missing, it’s almost always because something else had the microphone, the wrong device was in use, or the sound never reached the device. Start with the quick checks.
Quick things to try
- Make a 10-second test recording and speak normally. Watch the wave or level meters move while you talk.
- End any other call, voice note or recording app that might be using the microphone, then try again.
- Disconnect Bluetooth headphones and AirPods, or move away from them, so the device’s own microphone is used.
- Check that Metis AI is allowed to use the microphone (how, for each device, is below).
- On a call: make sure the call is playing somewhere Metis AI can hear it — out loud in the room for a phone, or through the Windows default speakers or headphones for the Windows app.
Why it happens
- No permission. The microphone was refused when the app asked, so nothing is recorded.
- The microphone is busy. A phone call, a video call or another app took it. Phones give it to one app at a time.
- A headset is the microphone. AirPods and other headsets mostly hear the person wearing them, not the room.
- The call can’t be heard. A phone can’t record the sound of another app or of a call on the same phone. On Windows, the call may be playing through a different device than the one Windows uses by default.
- Too far away. A phone across a large room may pick up very little.
How Metis AI tells you it can’t hear
The recording screen shows an amber note, and the Live Activity warns you too:
- Metis AI can’t hear anything — still recording, but no sound is coming in.
- Metis AI can hardly hear anything — almost no sound for 2 minutes.
- Not recording — the microphone isn’t available — no audio at all; the timer stops. It carries on by itself when the microphone is free.
- Recording paused — a call or another app took the microphone and Metis AI couldn’t get it back.
The Android app doesn’t warn you during a recording yet. Watch the wave on the recording screen: if it stays flat while people talk, nothing is being heard.
Watch the two meters: You is your microphone and The call is the computer’s audio. A meter that stays flat while that side is talking isn’t being heard. If a source couldn’t be opened, a note under the meters says why, such as No microphone found.
Afterwards, a meeting in which almost nothing was heard is marked Too little was said in your list.
Fix it on your device
- Microphone access needed appears when you tap record: open the iPhone’s Settings app › Metis AI and turn on Microphone.
- Paused by a call: the recording resumes by itself when the call ends. If it shows Recording paused instead, tap Resume. What was recorded before is safe.
- Recording through followed by your headphones’ name: tap Use iPhone mic (Use iPad mic on an iPad) to record the whole room.
- Can’t hear warnings with nothing else using the microphone: check that the bottom of the phone isn’t covered, and that a case isn’t blocking the microphones.
- If tapping Record does nothing, the microphone was refused and Android won’t ask again. Open your phone’s Settings › Apps › Metis AI › Permissions › Microphone and allow it.
- Don’t take a phone call on the same phone during a meeting: Android can keep the microphone from other apps during a call, and that part comes out silent.
- Disconnect Bluetooth headsets before you start.
Your side is missing (You stays flat):
- Open Windows Settings › Privacy & security › Microphone (Privacy › Microphone on Windows 10), and make sure microphone access is on and allowed for Metis AI.
- Metis AI records the Windows default microphone. Choose the right one in Windows Settings › System › Sound, under Input.
- Check you aren’t muted in hardware, such as a mute switch on a headset.
The other people are missing (The call stays flat):
- In Account › Recording on this computer, make sure Record the computer’s audio is on.
- Metis AI records what plays on the Windows default speakers or headphones. If Teams, Zoom or Meet is set to a different speaker in its own audio settings, set it to the default device (or make that device the default in Windows), then record again.
- If the start screen says Only your microphone will be recorded., Windows found no speakers or headphones to record from. Plug some in or turn them on.
Switching headphones in the middle of a meeting is fine: the recording follows the new default device.
Can I get the sound back for a recording that’s already silent?
No. Metis AI can only work with what was recorded. If part of a meeting was captured, the transcript and notes cover that part.
Still no sound?
Tell us what you see and we’ll help. On iPhone or iPad, open Settings › Send feedback (or shake the phone on the screen with the problem) and add a screenshot. On other devices, write to us from the support page.